Learning Dart as a JavaScript developer

This guide aims to leverage your JavaScript programming knowledge when learning Dart. It showcases key similarities and differences in both languages, and introduces Dart concepts that are unsupported in JavaScript. As a JavaScript developer, Dart should feel quite familiar, as both languages share many concepts.

Like JavaScript, Dart runs on an event loop, so both languages execute code in a similar way. For example, asynchronous concepts like futures (promises in JavaScript) and the async/await syntax are very similar.

Dart is strongly typed, unlike JavaScript. If you have used with TypeScript or Flow, this should simplify learning Dart. If you've mostly worked with pure JavaScript, it might be more of an adjustment. With strong typing, Dart catches many errors before compiling that might exist in JavaScript code.

Dart enables null safety by default. JavaScript doesn't support null safety. As a JavaScript developer, it might take a while to learn how to write null safe code, but the trade-off is better protection against null reference exceptions that are detected even before compiling Dart code. (Thereby avoiding those dreaded TypeErrors that occur when doing operations on a JavaScript variable that turns out to be null.)

JavaScript and Dart both have linting tools to enforce standard conventions. While JavaScript offers many tools, standards, and configurations, Dart has one official set of layout and style conventions plus a linter to simplify compliance. The Dart analyzer lints code along with providing more analytical functions. To customize the lint rules for your project, follow the Customizing static analysis instructions.

Dart provides dart fix to find and fix errors.

Dart also provides a code formatter similar to JavaScript tools like Prettier. To format code in any Dart project, run dart format on your command line. The IDE plugins for Dart and Flutter also provide this ability.

Dart supports trailing commas for comma-separated lists of collections, parameters, or arguments. When you add the trailing comma, the formatter places each list item on its own line. When you believe your list may have more items at a later date, add the trailing comma. Avoid adding the trailing comma for the formatting benefit alone.

JavaScript supports trailing commas in list and map literals only.

Both JavaScript and Dart categorize their data into types. Every variable has an associated type. The type determines the kind of value the variable can store and what operations can be performed on these values. Dart differs from JavaScript in that it assigns a static type to every expression and variable. The static type predicts the runtime type of the values of a variable, or of the value of an expression. This means that Dart apps have sound static typing.

JavaScript provides primitive types num, string, and boolean and the null value as well as arrays and a Map type.

Dart supports the following built-in types:

• Numbers (num, int, double)
• Strings (String)
• Booleans (bool)
• Lists (List, also known as arrays)
• Sets (Set)
• Maps (Map)
• Symbols (Symbol)
• The value null (Null)

To learn more, check out Built-in types in the Dart Language Tour.

All non-Null types in Dart are subtypes of Object. All values are also objects. Dart doesn't use "primitive types" like JavaScript. By contrast, Dart normalizes or canonicalizes number, boolean and null values. This means only one int value with the numerical value 1 exists.

For example: The equals operator == and the identical() method return true for the same values of number types. Review the example shown in the following code:

var a = 2;
var b = 1 + 1;

print(a == b); // Prints true
print(identical(a, b)); // Prints true; only one "2" object exists

This section covers how Dart represents primitive types from JavaScript.

Dart has three data types for holding numbers:

num

The equivalent to the generic number type in JavaScript.

int

A numeric value without a fractional part.

double

Any 64-bit (double-precision) floating point number.

The Dart API includes all these types as classes. Both the int and double types share num as their parent class:

As Dart considers numbers as objects, numbers can expose their own utility functions as object methods. You don't need to use an additional object to apply a function to a number.

For example, to round a double to an integer:

let rounded = Math.round(2.5);

var rounded = 2.5.round();

Strings in Dart work like strings in JavaScript. To write a string literal, enclose it in single (') or double (") quotation marks. The majority of Dart developers use single quotes, but the language enforces no standard. Use double quotation marks if you don't want to escape single quotes within the string.

var a = 'This is a string.';

To include a character with another meaning in a string, like a $ used for string interpolation, you must escape that character. Escaping special characters in Dart works like JavaScript and most other languages. To escape special characters, precede that character with the backslash character (\).

The following code shows some examples.

final singleQuotes = 'I\'m learning Dart'; // I'm learning Dart
final doubleQuotes = "Escaping the \" character"; // Escaping the " character
final dollarEscape = 'The price is \$3.14.'; // The price is $3.14.
final backslashEscape = 'The Dart string escape character is \\.';
final unicode = '\u{1F60E}'; // 😎,  Unicode scalar U+1F60E

JavaScript supports template literals. These use backtick (`) character delimiters for the following reasons:

• To allow for multiline strings
• To interpolate strings with embedded expressions
• To create special constructs called tagged templates

In Dart, you don't need to enclose a string in backticks to concatenate strings or use interpolations within string literals.

To learn more, check out Strings in the Dart Language Tour.

As in JavaScript template literals, you can use the ${<expression>} syntax to insert expressions into a string literal. Dart uses this syntax and allows you to omit the curly braces when the expression uses a single identifier.

var food = 'bread';
var str = 'I eat $food'; // I eat bread
var str = 'I eat ${food}'; // I eat bread

In JavaScript, you can define multiline strings using template literals. Dart has two ways to define multiline strings.

1. Using implicit string concatenation: Dart concatenates any neighboring string literals, even when spread over multiple lines:
   dart

   final s1 = 'String '
       'concatenation'
       " even works over line breaks.";

2. Using a multi line string literal: When using three quotation marks (either single or double) on either side of the string, the literal can span multiple lines.
   dart

   final s2 = '''
   You can create
   multiline strings like this one.
   ''';
   
   final s3 = """
   This is also a
   multiline string.""";

Dart considers two strings equal when they contain the same sequence of code units. To determine if two strings have the same sequences, use the equal-to operator (==).

final s1 = 'String '
    'concatenation'
    " works even over line breaks.";
assert(s1 ==
    'String concatenation works even over '
        'line breaks.');

Boolean values in both Dart and Javascript express a binary condition. These two values represent whether a value or expression is true or false. You can return the values using the literals true and false, or produced them using expressions like x < 5 or y == null.

let isBananaPeeled = false;

var isBananaPeeled = false;

Variables in Dart work like variables in JavaScript, with two exceptions:

1. Each variable has a type.
2. Dart scopes all variables at the block level, like let and const variables in JavaScript.

A Dart variable gets its type in one of two ways:

1. Declared: A type written in the declaration.
2. Inferred: An expression used to initialize the variable. By convention, use var or final when the analyzer can infer the type.

// Declare and initialize a variable at once
let name = "bob";

// Declare a variable with a specific type
// when you don't provide an initial value
String name;
// Declare and initialize a variable
// at the same time and Dart infers
// the type
var name = 'bob';

Variables can only accept values of their type.

var name = 'bob';
name = 5; // Forbidden, as `name` has type `String`.

If you don't provide an initial value or explicit type, Dart infers the variable's type to be the catch-all type dynamic.

Like JavaScript variables, you can assign any value to Dart variables that use the dynamic type.

// Declare a variable
let name;
// Initialize the variable
name = "bob";

// Declare a variable without a type or assigned value
// and Dart infers the 'dynamic' type
var name;
// Initialize the variable and the type remains `dynamic`
name = 'bob';
name = 5; // Allowed, as `name` has type `dynamic`.

Both JavaScript and Dart use variable modifiers. Both use const, but differ in how const works. Where JavaScript would use const, Dart uses final.

When you add final to a Dart variable or const to a JavaScript variable, you must initialize the variable before other code can read its value. Once initialized, you can't change these variables' references.

When Dart uses const, it refers to special values that it creates when compiling. Dart uses limited expressions to create these immutable values. These expressions cannot have side effects. Under these conditions, the compiler can then predict the precise value of a constant variable or expression, not just its static type.

final String name;
// Cannot read name here, not initialized.
if (useNickname) {
  name = "Bob";
} else {
  name = "Robert";
}
print(name); // Properly initialized here.

In Dart, constant variables must contain constant values. Non-constant variables can contain constant values that you can also mark as const.

var foo = const [];
  // foo is not constant, but the value it points to is.
  // You can reassign foo to a different list value,
  // but its current list value cannot be altered.

const baz = []; // Equivalent to `const []`

Likewise, classes can have their own const constructors that produce immutable instances.

You can't modify a const variable in JavaScript or Dart. JavaScript does allow you to modify a const object's fields, but Dart does not.

To learn more, see the Classes section.

Unlike JavaScript, Dart supports null safety. In Dart, all types default to non-nullable. This benefits Dart developers because Dart catches null reference exceptions when writing code, rather than at runtime.

None of the variables in the following code example can be null.

// In null-safe Dart, none of these can ever be null.
var i = 42; // Inferred to be an int.
String name = getFileName();
final b = Foo(); // Foo() invokes a constructor

To indicate that a variable might have the value null, add ? to its type declaration:

int? aNullableInt = null;

The same goes for any other type declaration, such as a function declaration:

String? returnsNullable() {
  return random.nextDouble() < 0.5
    ? 'Sometimes null!'
    : null;
}

String returnsNonNullable() {
  return 'Never null!';
}

Dart supports several operators to deal with nullability. As in JavaScript, Dart supports the null assignment operator (??=), null-coalescing operator (??), and optional chaining operator (?.). These operators work the same as JavaScript.

In cases where a nullable variable or expression might be non-null, you can tell the compiler to repress any compile time errors using the (!) operator. Place this operator after the expression.

Don't confuse this with Dart's not (!) operator, which uses the same symbol but place before the expression.

int? a = 5;

int b = a; // Not allowed.
int b = a!; // Allowed.

At runtime, if a turns out to be null, a runtime error occurs.

Like the ?. operator, use the ! operator when accessing properties or methods on an object:

myObject!.someProperty;
myObject!.someMethod();

If myObject is null at runtime, a runtime error occurs.

While Dart's functions work much the same as their counterparts in JavaScript, they do have some additional features, and some minor syntax differences when declaring them. Similar to JavaScript, you can declare functions pretty much anywhere, whether at the top level, as a class field, or in the local scope.

// On the top level
function multiply(a, b) {
  return a * b;
}

// As a class field
class Multiplier {
  multiply(a, b) {
    return a * b;
  }
}

// In a local scope
function main() {
  function multiply(a, b) {
    return a * b;
  }

  console.log(multiply(3, 4));
}

// On the top level
int multiply(a, b) {
  return a * b;
}

// As a class field
class Multiplier {
  multiply(a, b) {
    return a * b;
  }
}

// In a local scope
main() {
  multiply(a, b) {
    return a * b;
  }

  print(multiply(3, 4));
}

Both Dart and JavaScript support arrow syntax (=>), but differ in how they support it. In Dart, you can only use the arrow syntax when the function contains a single expression or return statement.

For example, the following isNoble functions are equivalent:

bool isNoble(int atomicNumber) {
  return _nobleGases[atomicNumber] != null;
}

bool isNoble(int atomicNumber) => _nobleGases[atomicNumber] != null;

In JavaScript, all parameters can be positional parameters. By default, Dart requires you to pass all parameters as arguments to functions.

int multiply(int a, int b) {
  return a * b;
}

main() {
  multiply(3, 5); // Valid. All parameters are provided.
  multiply(3); // Invalid. All parameters must be provided.
}

This can change in two situations:

1. The positional parameters are marked as optional.
2. The parameters are named and not marked as required.

To define optional positional parameters, enclose them in square brackets following any required positional parameters. You can't follow optional parameters with required parameters.

Due to null safety, optional positional parameters must have a default value or be marked as nullable. To learn more, see the preceding section about null safety.

The following code has one valid and two invalid examples of functions that define optional positional parameters.

// Valid: `b` has a default value of 5. `c` is marked as nullable.
multiply(int a, [int b = 5, int? c]) {
  ...
}
// Invalid: a required positional parameter follows an optional one.
multiply(int a, [int b = 5], int c) {
  ...
}
// Invalid: Neither optional positional parameter has a default
//          value or has been flagged as nullable.
multiply(int a, [int b, int c]) {
  ...
}

The following example shows how to call a function with optional parameters:

multiply(int a, [int b = 5, int? c]) {
  ...
}

main() {
  // All are valid function calls.
  multiply(3);
  multiply(3, 5);
  multiply(3, 5, 7);
}

Dart supports named parameters. These don't have to be provided in the order they're defined, as with positional parameters. You refer to them by name instead. By default, these are optional, unless they're flagged as required. Named parameters are defined by surrounding them with curly braces. You can combine named parameters with required positional parameters—in this scenario, the named parameters are always placed after positional. When calling a function with named parameters, pass values by prefixing the passed value with the name of the parameter, separated by a colon. For example, f(namedParameter: 5).

Again, with null safety, named parameters that are not flagged as required either need to have a default value or be flagged as nullable.

The following code defines a function with named parameters:

// Valid:
// - `a` has been flagged as required
// - `b` has a default value of 5
// - `c` is marked as nullable
// - Named parameters follow the positional one
multiply(bool x, {required int a, int b = 5, int? c}) {
  ...
}

The following examples call a function with named parameters:

// All are valid function calls.
// Beyond providing the required positional parameter:
multiply(false, a: 3); // Only provide required named parameters
multiply(false, a: 3, b: 9); // Override default value of `b`
multiply(false, c: 9, a: 3, b: 2); // Provide all named parameters out of order

JavaScript and Dart treat functions as first-class citizens. This means that Dart treats functions as any other object. For example, the following code shows how to pass a function as a parameter to another function:

void printElement(int element) {
  print(element);
}

var list = [1, 2, 3];

// Pass printElement as a parameter.
list.forEach(printElement);

JavaScript and Dart both support anonymous functions, or functions without a name. As with named functions, you can pass anonymous functions like any other value. For example, store anonymous functions in a variable, pass them as an argument to another function, or return them from another function.

JavaScript has two ways to declare an anonymous function:

1. Use a standard function expression
2. Use arrow syntax

Likewise, Dart also has two ways to declare anonymous functions. Both work in a similar manner to the JavaScript arrow expression. Dart's anonymous functions do not support the extra functionality that comes with regular function expressions. For example, JavaScript's support for a function expression acting like a constructor, or creating a custom binding to this.

To learn more, see the Classes section.

// A regular function expression
// assigned to a variable
let funcExpr = function(a, b) {
  return a * b;
}
// The same anonymous function
// expressed as an arrow
// function with curly braces.
let arrowFuncExpr = (a, b) => {
  return a * b;
}
// An arrow function with only
// one return statement as
// its contents does not
// require a block.
let arrowFuncExpr2 = (a, b) => a * b;

// Assign an anonymous function
// to a variable.
var blockFunc =
  optionalCallback ?? (int a, int b) {
    return a * b;
};

// For an expression with only a return statement,
// you can use the arrow syntax:
var singleFunc = (int a, int b) => a * b;

As with JavaScript, you can pass anonymous functions to other functions. Developers often pass anonymous functions when using the map function for arrays and lists:

// returns [4, 5, 6]
[1, 2, 3].map(e => e + 3);

// returns [5, 7, 9]
[1, 2, 3].map(e => {
  e *= 2;
  return e + 3;
});

// returns [4, 5, 6]
[1, 2, 3].map((e) => e + 3).toList();

// returns [5, 7, 9]
var list2 = [1, 2, 3].map((e) {
  e *= 2;
  return e + 3;
}).toList();

Both languages support generator functions. These functions return an iterable collection of items computed to avoid unnecessary work.

To write a generator function in Dart, add the sync* keyword after the function parameters, and return an Iterable. Add items to the final iterable using the yield keyword, or add whole sets of items using yield*.

The following example shows how to write a basic generator function:

function* naturalsTo(n) {
  let k = 0;
  while (k < n) {
    yield k++;
  }
}

// Returns [0, 1, 2, 3, 4]
for (let value of naturalsTo(5)) {
  console.log(value);
}

Iterable<int> naturalsTo(int n) sync* {
  int k = 0;
  while (k < n) {
    yield k++;
  }
}

// Returns an iterable with [0, 1, 2, 3, 4]
print(naturalsTo(5).toList());

function* doubleNaturalsTo(n) {
  let k = 0;
  while (k < n) {
    yield* [k, k];
    k++;
  }
}

// Returns [0, 0, 1, 1, 2, 2]
for (let value of doubleNaturalsTo(3)) {
  console.log(value);
}

Iterable<int> doubleNaturalsTo(int n) sync* {
  int k = 0;
  while (k < n) {
    yield* [k, k];
    k++;
  }
}

// Returns an iterable with [0, 0, 1, 1, 2, 2]
print(doubleNaturalsTo(3));

You can also define asynchronous generator functions, which return streams instead of iterables. Learn more in the upcoming Asynchrony section.

This section describes differences in statements between JavaScript and Dart.

Most control statements work like their JavaScript counterparts. Some have additional uses for Collections.

While both JavaScript and Dart have for-in loops, their behaviors differ.

JavaScript's for-in loop iterates over an object's properties. To iterate over a JavaScript iterable object's elements, you must use for-of or Array.forEach(). Dart's for-in loop works like JavaScripts for-of.

The following example shows iterating over a collection and printing out each element:

for (const element of list) {
  console.log(element);
}

for (final element in list) {
  print(element);
}

When using continue in a switch statement, you can combine it with a label that is put on a case:

switch (testEnum) {
  case TestEnum.A:
    print('A');
    continue b;
  b:
  case TestEnum.B:
    print('B');
    break;
}

Both Dart and JavaScript contain predefined operators. Neither language supports adding new operators. Dart supports overloading some existing operators with the operator keyword. For example:

class Vector {
  final double x;
  final double y;
  final double z;
  Vector(this.x, this.y, this.z);
  Vector operator +(Vector other) => Vector(
    x + other.x, 
    y + other.y,
    z + other.z,
  );
  Vector operator *(double scalar) => Vector(
    x * scalar,
    y * scalar,
    z * scalar,
  );
}

The equality and relational operators of both languages are almost identical, as shown in the following table:

For example:

assert(2 + 3 == 5);
assert(2 - 3 == -1);
assert(2 * 3 == 6);
assert(5 / 2 == 2.5); // Result is a double
assert(5 ~/ 2 == 2); // Result is an int
assert(5 % 2 == 1); // Remainder

a = 0;
b = ++a; // Increment a before b gets its value.
assert(a == b); // 1 == 1

a = 0;
b = a++; // Increment a AFTER b gets its value.
assert(a != b); // 1 != 0

a = 0;
b = --a; // Decrement a before b gets its value.
assert(a == b); // -1 == -1

a = 0;
b = a--; // Decrement a AFTER b gets its value.
assert(a != b); // -1 != 0

You've probably noticed that Dart also contains a ~/ operator (called a truncating division operator), that divides a double and outputs a floored integer:

assert(25 == 50.4 ~/ 2);
assert(25 == 50.6 ~/ 2);
assert(25 == 51.6 ~/ 2);

The equality and relational operators of both languages work in the same way:

The == and != JavaScript operators have no equivalent.

For example:

assert(2 == 2);
assert(2 != 3);
assert(3 > 2);
assert(2 < 3);
assert(3 >= 3);
assert(2 <= 3);

The implementation of test operators is a bit different between the two languages:

The result of obj is T is true if obj implements the interface specified by T. For example, obj is Object? is always true.

Use the typecast operator (as) to ensure that a value has a particular type. The compiler can use that, if you know that the object will have that type.

For example:

(person as Employee).employeeNumber = 4204583;

If you don't know that the object is of type T, then use is T to check the type before using the object.

In Dart, the types of local variables update within the scope of the if statement. This is not the case for instance variables.

if (person is Employee) {
   person.employeeNumber = 4204583;
}

You can invert or combine boolean expressions using logical operators. The logical operators of both languages are identical.

JavaScript allows any value to be used where you need a Boolean value. It then converts those values to either true or false. JavaScript considers empty strings and the number 0 to be "falsy" values. Dart allows bool values in conditions and as operands of logical operators.

For example:

if (!done && (col == 0 || col == 3)) {
  // ...Do something...
}

You can manipulate the individual bits of numbers by using bitwise and shift operators with integers. The operators of both languages are almost identical, as shown in the following table:

For example:

final value = 0x22;
final bitmask = 0x0f;

assert((value & bitmask) == 0x02); // AND
assert((value & ~bitmask) == 0x20); // AND NOT
assert((value | bitmask) == 0x2f); // OR
assert((value ^ bitmask) == 0x2d); // XOR
assert((value << 4) == 0x220); // Shift left
assert((value >> 4) == 0x02); // Shift right
assert((-value >> 4) == -0x03); // Shift right
assert((value >>> 4) == 0x02); // Unsigned shift right
assert((-value >>> 4) > 0); // Unsigned shift right

Both Dart and JavaScript contain a conditional operator (?:) for evaluating expressions. Some developers refer to this as a ternary operator because it takes three operands. As Dart has another operator ([]=) that takes three operands, call this operator (?:) the conditional operator. This operator works for expressions like if-else does for statements.

let visibility = isPublic ? "public" : "private";

final visibility = isPublic ? 'public' : 'private';

Use the (=) operator to assign values.

// Assign value to a
a = value;

This operator also has a null-aware variant (??=).

To learn more, see the null-assignment operator section.

JavaScript and Dart include operators that calculate and assign new values to the variable in the expression. These assignment operators use the right-side value and the variable initial value as operands.

The following table lists these assignment operators:

JavaScript does not support the ~/= assignment operator.

var a = 5;
a *= 2; // Multiply `a` by 2 and assign the result back to a.
print(a); // `a` is now 10.

Dart allows you to chain multiple method calls, property assignments, or both on a single object. Dart refers to this as cascading and uses the cascade syntax (..) to perform this action.

JavaScript lacks this syntax.

The following example shows chaining multiple methods on a newly constructed object using the cascade syntax:

var animal = Animal() // Sets multiple properties and methods
  ..name = "Bob"
  ..age = 5
  ..feed()
  ..walk();

print(animal.name); // "Bob"
print(animal.age); // 5

To make the first cascade syntax null-aware, write it as ?...

var result = maybePerson
    ?..employment = employer
    ..salary = salary;

Dart ignores the entire cascade if the maybePerson value is null.

This section covers some collection types in Dart and compare them to similar types in JavaScript.

Dart writes list literals in the same ways as JavaScript arrays. Dart encloses lists in square brackets and separate values with commas.

// Initialize list and specify full type
final List<String> list1 = <String>['one', 'two', 'three'];

// Initialize list using shorthand type
final list2 = <String>['one', 'two', 'three'];

// Dart can also infer the type
final list3 = ['one', 'two', 'three'];

The following code samples give an overview of the basic actions that you can perform on a Dart List. The following example shows how to retrieve a value from a List using the index operator.

final fruits = <String>['apple', 'orange', 'pear'];
final fruit = fruits[1];

Add a value to the end of the List using the add method. Add another List using the addAll method:

final fruits = <String>['apple', 'orange', 'pear'];
fruits.add('peach');
fruits.addAll(['kiwi', 'mango']);

Insert a value at a specific position using the insert method. Insert another List at a specific position using the insertAll method:

final fruits = <String>['apple', 'orange', 'pear'];
fruits.insert(0, 'peach');
fruits.insertAll(0, ['kiwi', 'mango']);

Update a value in the List combining the index and assignment operators:

final fruits = <String>['apple', 'orange', 'pear'];
fruits[2] = 'peach';

Remove items from a List using one of the following methods:

final fruits = <String>['apple', 'orange', 'pear'];
// Remove the value 'pear' from the list.
fruits.remove('pear');
// Removes the last element from the list.
fruits.removeLast();
// Removes the element at position 1 from the list.
fruits.removeAt(1);
// Removes the elements with positions greater than
// or equal to start (1) and less than end (3) from the list.
fruits.removeRange(1, 3);
// Removes all elements from the list that match the given predicate.
fruits.removeWhere((fruit) => fruit.contains('p'));

Use length to obtain the number of values in the List:

final fruits = <String>['apple', 'orange', 'pear'];
assert(fruits.length == 3);

Use isEmpty to check if the List is empty:

var fruits = [];
assert(fruits.isEmpty);

Use isNotEmpty to check if the List is not empty:

final fruits = <String>['apple', 'orange', 'pear'];
assert(fruits.isNotEmpty);

Dart's List class includes a way to create a List with each item having the same value. This filled constructor creates a fixed-length list of size n with one default value. The following example create a list of 3 items:

final list1 = List.filled(3, 'a'); // Creates: [ 'a', 'a', 'a' ]

• You cannot add or remove elements from this list by default. To permit this list to add or remove elements, add , growable: true to the end of the parameter list.
• You can access and update elements of this list using their index value.

The Dart List class includes a way to create a List of incrementing values. This generate constructor creates a fixed-length list of size n with a template to build element values. This template takes the index as a parameter.

// Creates: [ 'a0', 'a1', 'a2' ]
final list1 = List.generate(3, (index) => 'a$index');

Unlike JavaScript, Dart supports defining Sets with literals. Dart defines sets in the same way as lists, but using curly braces rather than square brackets. Sets are unordered collections that only contain unique items. Dart enforces the uniqueness of these items using hash codes, meaning that objects need hash values to be stored in a Set.

The following code snippet shows how to initialize a Set:

final abc = {'a', 'b', 'c'};

The syntax for creating an empty set might seem confusing at first, because specifying empty curly braces ({}) results in creating an empty Map. To create an empty Set, precede the {} declaration with a type argument or assign {} to a variable of type Set:

final names = <String>{};
// Set<String> names = {}; // This works, too.
// final names = {}; // Creates an empty map, not a set.

The following examples provide an overview of the basic actions that you can perform on a Dart Set.

Add a value to the Set using the add method. Use the addAll method to add multiple values:

final fruits = {'apple', 'orange', 'pear'};
fruits.add('peach');
fruits.addAll(['kiwi', 'mango']);

Use one of the following methods in Set to remove content from the set:

final fruits = {'apple', 'orange', 'pear'};
// Remove the value 'pear' from the set.
fruits.remove('pear');
// Remove all elements in the supplied list from the set.
fruits.removeAll(['orange', 'apple']);
// Removes all elements from the list that match the given predicate.
fruits.removeWhere((fruit) => fruit.contains('p'));

Use length to get the number of values in the Set:

final fruits = {'apple', 'orange', 'pear'};
assert(fruits.length == 3);

Use isEmpty to check if the Set is empty:

var fruits = <String>{};
assert(fruits.isEmpty);

Use isNotEmpty to check if the Set is not empty:

final fruits = {'apple', 'orange', 'pear'};
assert(fruits.isNotEmpty);

The Map type in Dart resembles the Map type in JavaScript. Both types associate keys with values. A key can be any object type if all keys have the same type. This rule applies to values as well. Each key occurs once at most, but you can use the same value multiple times.

Dart bases the dictionary on a hash table. This means that keys need to be hashable. Every Dart object contains a hash.

Consider these simple Map examples, created using literals:

final gifts = {
  'first': 'partridge',
  'second': 'turtle doves',
  'fifth': 'golden rings'
};

final nobleGases = {
  2: 'helium',
  10: 'neon',
  18: 'argon',
};

The following code samples provide an overview of the basic actions that you can perform on a Dart Map. The following example shows how to retrieve a value from a Map using the index operator.

final gifts = {'first': 'partridge'};
final gift = gifts['first'];

Use the containsKey method to check if the Map includes a key.

final gifts = {'first': 'partridge'};
assert(gifts.containsKey('fifth'));

Use the index assignment operator ([]=) to add or update an entry in the Map. If the Map doesn't yet contain the key, Dart adds the entry. If the key exists, Dart updates its value.

final gifts = {'first': 'partridge'};
gifts['second'] = 'turtle'; // Gets added
gifts['second'] = 'turtle doves'; // Gets updated

Use the addAll method to add another Map. Use the addEntries method to add other entries to the Map.

final gifts = {'first': 'partridge'};
gifts['second'] = 'turtle doves';
gifts.addAll({
  'second': 'turtle doves',
  'fifth': 'golden rings',
});
gifts.addEntries([
  MapEntry('second', 'turtle doves'),
  MapEntry('fifth', 'golden rings'),
]);

Use the remove method to remove an entry from the Map. Use the removeWhere method to remove all entries that satisfy a given test.

final gifts = {'first': 'partridge'};
gifts.remove('first');
gifts.removeWhere((key, value) => value == 'partridge');

Use length to obtain the number of key-value pairs in the Map.

final gifts = {'first': 'partridge'};
gifts['fourth'] = 'calling birds';
assert(gifts.length == 2);

Use isEmpty to check if the Map is empty.

final gifts = {};
assert(gifts.isEmpty);

Use isNotEmpty to check if the Map is not empty.

final gifts = {'first': 'partridge'};
assert(gifts.isNotEmpty);

Pure JavaScript doesn't support immutability. Dart offers multiple ways to make collections like arrays, sets, or dictionaries immutable.

• If the collection is a compile-time constant and shouldn't be modified, use the const keyword:
  const fruits = <String>{'apple', 'orange', 'pear'};
• Assign the Set to a final field, meaning that the Set itself doesn't have to be a compile-time constant. This ensures that the field can't be overridden with another Set, but it still allows the size or the contents of the Set to be modified:
  final fruits = <String>{'apple', 'orange', 'pear'};
• Create a final version of your collection type using the unmodifiable constructor (as shown in the following example). This creates a collection that cannot change its size or content:

final _set = Set<String>.unmodifiable(['a', 'b', 'c']);
final _list = List<String>.unmodifiable(['a', 'b', 'c']);
final _map = Map<String, String>.unmodifiable({'foo': 'bar'});

As in JavaScript, Dart supports embedding a list into another list using the spread operator (...) and the null-aware spread operator (...?).

var list1 = [1, 2, 3];
var list2 = [0, ...list1];　// [0, 1, 2, 3]
// When the list being inserted could be null:
list1 = null;
var list2 = [0, ...?list1]; // [0]

This also works for sets and maps:

// Spread operator with maps
var map1 = {'foo': 'bar', 'key': 'value'};
var map2 = {'foo': 'baz', ...map1}; // {foo: bar, key: value}
// Spread operator with sets
var set1 = {'foo', 'bar'};
var set2 = {'foo', 'baz', ...set1}; // {foo, baz, bar}

In Dart, the for and if keywords have additional functionality when it comes to collections.

A collection if statement includes items from a list literal only when the specified condition is met:

var nav = [
  'Home',
  'Furniture',
  'Plants',
  if (promoActive) 'Outlet',
];

It works similarly for maps and sets.

A collection for statement allows multiple items to be mapped into another list:

var listOfInts = [1, 2, 3];
var listOfStrings = [
  '#0',
  for (var i in listOfInts) '#$i',
]; // [#0, #1, #2, #3]

This also works in the same way for maps and sets.

Like JavaScript, the Dart Virtual Machine (VM) runs a single event loop that processes all your Dart code. This means that similar rules for asynchrony apply here. All of your code runs synchronously, but you can handle it in a different order, depending on how you use the asynchronous tools at your disposal. Here are some of these constructs and how they relate to their JavaScript counterparts.

Future is Dart's version of a JavaScript Promise. Both are the result of an asynchronous operation that resolves at a later point.

Functions in Dart or in Dart packages might return a Future, rather than the value they represent, as the value might not be available until later.

The following example shows that handling a future works in the same way in Dart as a promise works in JavaScript.

const httpResponseBody = func();

httpResponseBody.then(value => {
  console.log(
    `Promise resolved to a value: ${value}`
  );
});

Future<String> httpResponseBody = func();

httpResponseBody.then((String value) {
  print('Future resolved to a value: $value');
});

Similarly, futures can fail like promises. Catching errors works the same as well:

httpResponseBody
  .then(...)
  .catch(err => {
    console.log(
      "Promise encountered an error before resolving."
    );
  });

httpResponseBody
  .then(...)
  .catchError((err) {
    print(
      'Future encountered an error before resolving.'
    );
  });

You can also create futures. To create a Future, define and call an async function. When you have a value that needs to be a Future, convert the function as in the following example.

String str = 'String Value';
Future<String> strFuture = Future<String>.value(str);

If you're familiar with promises in JavaScript, you're likely also familiar with the async/await syntax. This syntax is identical in Dart: functions are marked async, and async functions always return a Future. If the function returns a String and is marked async, it returns a Future<String> instead. If it returns nothing, but it is async, it returns Future<void>.

The following example shows how to write an async function:

// Returns a Promise of a string,
// as the method is async
async fetchString() {
  // Typically some other async
  // operations would be done here.
  return "String Value";
}

// Returns a future of a string,
// as the method is async
Future<String> fetchString() async {
  // Typically some other async
  // operations would be done here.
  return 'String Value';
}

Call this async function as follows:

Future<String> stringFuture = fetchString();
stringFuture.then((String str) {
  print(str); // 'String Value'
});

Obtain a future's value using the await keyword. As in JavaScript, this removes the need to call then on the Future to obtain its value, and it allows you to write asynchronous code in a more synchronous-like way. As in JavaScript, awaiting futures is only possible within an async context (such as another async function).

The following example shows how to await a future for its value:

// We can only await futures within an async context.
Future<void> asyncFunction() async {
  var str = await fetchString();
  print(str); // 'String Value'
}

To learn more about Futures and the async/await syntax, see the Asynchronous programming tutorial.

Another tool in Dart's async toolbox is Streams. While JavaScript has its own concept of streams, Dart's are more akin to Observables, as found in the commonly used rxjs library. If you happen to be familiar with this library, Dart's streams should feel familiar.

For those not familiar with these concepts: Streams basically act like Futures, but with multiple values spread out over time, like an event bus. Your code can listen to a stream, and it can either complete or reach a fail state.

To listen to a stream, call its listen method and provide a callback method. Whenever the stream emits a value, Dart calls this method:

Stream<int> stream = ...
stream.listen((int value) {
  print('A value has been emitted: $value');
});

The listen method includes optional callbacks for handling errors or for when the stream completes:

stream.listen(
  (int value) { ... },
  onError: (err) {
    print('Stream encountered an error! $err');
  },
  onDone: () {
    print('Stream completed!');
  },
);

The listen method returns an instance of a StreamSubscription, which you can use to stop listening to the stream:

StreamSubscription subscription = stream.listen(...);
subscription.cancel();

This is not the only way to listen to a stream. Similar to the async/await syntax for Futures, you can combine a stream with a for-in loop in an async context. The for loop invokes the callback method for each item emitted, and it ends when the stream completes or errors out:

Future<int> sumStream(Stream<int> stream) async {
  var sum = 0;
  await for (final value in stream) {
    sum += value;
  }
  return sum;
}

When an error occurs when listening to a stream in this way, the error is rethrown at the line containing the await keyword. You can handle this error with a try-catch statement:

try {
  await for (final value in stream) { ... }
} catch (err) {
  print('Stream encountered an error! $err');
}

As with Futures, you have several different ways to create a stream. The Stream class has utility constructors for creating streams from Futures or Iterables, or for creating streams that emit values at a timed interval. To learn more, see the Stream API page.

The utility class StreamController can create and control streams. Its stream property exposes the stream it controls. Its methods provides ways to add events to that stream.

For example, the add method can emit new items and the close method completes the stream.

The following example shows basic usage of a stream controller:

var listeners = 0;
StreamController<int>? controller;
controller = StreamController<int>(
  onListen: () {
    // Emit a new value every time the stream gets a new listener.
    controller!.add(listeners++);
    // Close the stream after the fifth listener.
    if (listeners > 5) controller.close();
  }
);
// Get the stream for the stream controller
var stream = controller.stream;
// Listen to the stream
stream.listen((int value) {
  print('$value');
});

Async generator functions can create streams. These functions resemble a synchronous generator function but use the async* keyword and return a Stream.

In an async generator function, the yield keyword emits the given value to the stream. The yield* keyword, however, works with streams instead of other iterables. This allows events from other streams to be emitted to this stream. In the following example, the function continues once the newly yielded stream has completed.

Stream<int> asynchronousNaturalsTo(int n) async* {
  var k = 0;
  while (k < n) yield k++;
}

Stream<int> stream = asynchronousNaturalsTo(5);

// Prints each of 0 1 2 3 4 in succession.
stream.forEach(print(value));

Learn more about futures, streams, and other asynchronous functionality in the asynchronous programming docs.

On the surface, classes in Dart are similar to classes in JavaScript, although JavaScript classes are technically more of a wrapper around prototypes. In Dart, classes are a standard feature of the language. This section covers defining and using classes in Dart and how they differ from JavaScript.

The this keyword in Dart is more straightforward than in JavaScript. In Dart, you can't bind functions to this, and this never depends on the execution context (as it does in JavaScript). In Dart, this is only used within classes, and always refers to the current instance.

This section discusses how constructors differ in Dart from JavaScript.

A standard class constructor looks very similar to a JavaScript constructor. In Dart, the constructor keyword is replaced by the full class name, and all parameters must be explicitly typed. In Dart, the new keyword was once required for creating class instances, but is now optional and its use is no longer recommended.

class Point {
  final double x;
  final double y;

  Point(double x, double y) : this.x = x, this.y = y { }
}

// Create a new instance of the Point class
Point p = Point(3, 5);

Use initializer lists to write your constructor. Insert the initializer list between the constructor's parameters and body.

class Point {
  ...
  Point.fromJson(Map<String, double> json)
      : x = json['x']!,
        y = json['y']! {
    print('In Point.fromJson(): ($x, $y)');
  }
  ...
}

Writing code to assign class fields in the constructor can feel like creating boilerplate code, so Dart has some syntactic sugar, called initializing parameters to make this easier:

class Point {
  double x;
  double y;

  // Syntactic sugar for setting x and y
  // before the constructor body runs.
  Point(this.x, this.y);
}

// Create a new instance of the Point class
Point p = Point(3, 5);

Similar to functions, constructors have the option to take positioned or named parameters:

class Point {
  ...
  // With an optional positioned parameter
  Point(this.x, [this.y = 5]);
  // With named parameters
  Point({ required this.y, this.x = 5 });
  // With both positional and named parameters
  Point(int x, int y, { boolean multiply }) {
    ...
  }
  ...
}

Unlike JavaScript, Dart allows classes to have multiple constructors, by allowing you to name them. You can optionally have one single unnamed constructor, any additional constructors must be named:

const double xOrigin = 0;
const double yOrigin = 0;

class Point {
  double x = 0;
  double y = 0;

  Point(this.x, this.y);

  // Named constructor
  Point.origin()
      : x = xOrigin,
        y = yOrigin;
}

To enable immutable class instances, use a const constructor. A class with a const constructor can have final instance variables only.

class ImmutablePoint {
  final double x, y;

  const ImmutablePoint(this.x, this.y);
}

You can call constructors from other constructors to prevent code duplication or to add additional defaults for parameters:

class Point {
  double x, y;

  // The main constructor for this class.
  Point(this.x, this.y);

  // Delegates to the main constructor.
  Point.alongXAxis(double x) : this(x, 0);
}

You can use a factory constructor when you don't need to create a new class instance. One example would be when returning a cached instance:

class Logger {
  static final Map<String, Logger> _cache =
      <String, Logger>{};
 
  final String name;
 
  // Factory constructor that returns a cached copy,
  // or creates a new one if it is not yet available.
  factory Logger(String name) {
    return _cache.putIfAbsent(
        name, () => _cache[name] ??= Logger._internal(name);
  }

  // Private constructor for internal use only
  Logger._internal(this.name);
}

In both Dart and JavaScript, methods serve as functions that provide behavior for an object.

function doSomething() { // This is a function
  // Implementation..
}

class Example {
  doSomething() { // This is a method
    // Implementation..
  }
}

void doSomething() { // This is a function
 // Implementation..
}

class Example {
 void doSomething() { // This is a method
   // Implementation..
 }
}

Dart allows classes to extend another class, in the same way that JavaScript does.

class Animal {
  int eyes;
 
  Animal(this.eyes);
 
  makeNoise() {
    print('???');
  }
}

class Cat extends Animal {
  Cat(): super(2);

  @override
  makeNoise() {
    print('Meow');
  }
}
Animal animal = Cat();
print(animal.eyes); // 2
animal.makeNoise(); // Meow

When overriding a method from the parent class, use the @override annotation. While this annotation is optional, it shows that the override is intentional. The Dart analyzer shows a warning if the method is not actually overriding a superclass method.

The parent method that is being overridden can still be called using the super keyword:

class Cat extends Animal {
  ...
  @override
  makeNoise() {
    print('Meow');
    super.makeNoise();
  }
}
Animal animal = Cat();
animal.makeNoise(); // Meow
                    // ???

Like JavaScript, Dart doesn't have a separate definition for interfaces. However, unlike JavaScript, all class definitions double as an interface; you can implement a class as an interface using the implements keyword.

When a class is implemented as an interface, its public API must be implemented by the new class. Unlike extends, its method and field implementations aren't shared with the new class. While a class can only extend a single class, you can implement multiple interfaces at a time, even when the implementing class already extends another.

class Consumer {
  consume() {
    print('Eating food...');
  }
}
class Cat implements Consumer {
  consume() {
    print('Eating mice...');
  }
}
Consumer consumer = Cat();
consumer.consume(); // Eating mice

When implementing an interface, the super method can't be called as the method bodies are not inherited:

class Cat implements Consumer {
  @override
  consume() {
    print('Eating mice...');
    super.consume(); 
    // Invalid. The superclass `Object` has no `consume` method.
  }
}

To ensure that a class can only be extended or have its interface implemented, but to disallow the construction of any instances, mark it as abstract.

Classes marked as abstract can have abstract methods, which do not require a body and are instead required to be implemented when the class is either extended or its interface is implemented:

abstract class Consumer {
  consume();
}
// Extending the full class
class Dog extends Consumer {
  consume() {
    print('Eating cookies...');
  }
}
// Just implementing the interface
class Cat implements Consumer {
  consume() {
    print('Eating mice...');
  }
}
Consumer consumer;
consumer = Dog();
consumer.consume(); // Eating cookies...
consumer = Cat();
consumer.consume(); // Eating mice...

Mixins are used to share functionality between classes. You can use the mixin's fields and methods in the class, using their functionality as if it were part of the class. A class can use multiple mixins. This helps when multiple classes share the same functionality, without needing to inherit from each other or share a common ancestor.

Use the with keyword to add one or more comma-separated mixins to a class.

JavaScript has no keyword equivalent. JavaScript can use Object.assign to merge additional objects into an existing object, after instantiating.

The following examples show how JavaScript and Dart achieve similar behavior:

class Animal {}

// Defining the mixins
class Flyer {
  fly = () => console.log('Flaps wings');
}
class Walker {
  walk = () => console.log('Walks on legs');
}
 
class Bat extends Animal {}
class Goose extends Animal {}
class Dog extends Animal {}

// Composing the class instances with
// their correct functionality.
const bat =
  Object.assign(
    new Bat(),
    new Flyer()
    );
const goose =
  Object.assign(
    new Goose(),
    new Flyer(),
    new Walker()
    );
const dog =
  Object.assign(
    new Dog(),
    new Walker()
    );

// Correct calls
bat.fly();
goose.fly();
goose.walk();
dog.walk();
// Incorrect calls
bat.walk(); // `bat` lacks the `walk` method
dog.fly(); // `dog` lacks the `fly` method

abstract class Animal {}

// Defining the mixins
class Flyer {
  fly() => print('Flaps wings');
}
class Walker {
  walk() => print('Walks on legs');
}
 
class Bat extends Animal with Flyer {}
class Goose extends Animal with Flyer, Walker {}
class Dog extends Animal with Walker {}

// Correct calls
Bat().fly();
Goose().fly();
Goose().walk();
Dog().walk();
// Incorrect calls
Bat().walk(); // Not using the Walker mixin
Dog().fly(); // Not using the Flyer mixin

Alternatively, you can replace the class keyword with mixin to prevent the mixin from being used as a regular class:

mixin Walker {
  walk() => print('Walks legs');
}
// Not possible, as Walker is no longer a class.
class Bat extends Walker {}

Since you can use multiple mixins, they can have overlapping methods or fields with each other when used on the same class. They can even overlap with the class that uses them, or that class's superclass. The order in which they are added to a class matters.

To give an example:

class Bird extends Animal with Consumer, Flyer {

When a method is called on an instance of Bird, Dart starts with its own class, Bird, which takes precedence over other implementations. If Bird has no implementation, then Flyer is checked, followed by Consumer, until an implementation is found. The parent class, Animal, is checked last.

Extending classes, implementing interfaces, or using mixins all work when the affected class is editable. However, sometimes it's useful to extend a class that already exists or is part of another library or the Dart SDK.

In these cases, Dart offers the ability to write extensions for existing classes.

As an example, the following extension on the String class from the Dart SDK allows parsing of integers:

extension NumberParsing on String {
  int parseInt() {
    return int.parse(this);
  }
}

For the extension to become available, it has to be present in the same file, or its file must be imported.

Use it as follows:

import 'string_apis.dart'; // Import the file the extension is in
var age = '42'.parseInt(); // Use the extension method.

Getters and setters in Dart work exactly like their JavaScript counterparts:

class Person {
  _age = 0;

  get age() {
    return this._age;
  }

  set age(value) {
    if (value < 0) {
      throw new Error(
        'age cannot be negative'
        );
    }
    this._age = value;
  }
}

var person = new Person();
person.age = 10;
console.log(person.age);

class Person {
  int _age = 0;
 
  int get age {
    return _age;
  }
 
  set age(int value) {
    if (value < 0) {
      throw ArgumentError(
        'Age cannot be negative'
        );
    }
    _age = value;
  }
}

void main() {
  var person = Person();
  person.age = 10;
  print(person.age);
}

Like JavaScript, Dart has no access modifier keywords: all class members are public by default.

JavaScript will include private class members in the next practical revision of the EcmaScript standard. As such, implementations for this have been available in various browsers and runtimes for some time.

To make a class member private in JavaScript, prefix its name with a pound (or hash) symbol (#).

class Animal {
  eyes; // Public field
  #paws; // Private field

  #printEyes() { // Private method
    print(this.eyes);
  }

  printPaws() { // Public method
    print(this.#paws);
  }
}

To make a class member private in Dart, prefix its name with an underscore (_).

class Animal {
  int eyes; // Public field
  int _paws; // Private field

  void _printEyes() { // Private method
    print(this.eyes);
  }

  void printPaws() { // Public method
    print(this._paws);
  }
}

JavaScript uses the hash as a convention. Dart's compiler enforces use of the underscore for this feature.

Dart makes private members private to the library, not the class. This means that you can access private members from code in the same library. By default, Dart limits access to private class members to code in the same file. To expand the scope of a library beyond one file, add the part directive. When possible, avoid using part. Reserve using part for code generators.

To indicate that Dart initializes class fields at a later point, assign the late keyword to those class fields. Those class fields remain non-nullable. Do this when a variable doesn't need to observed or accessed immediately and can be initialized later. This differs from labeling the field as nullable.

• (Non-nullable) late fields cannot have null assigned at a later point.

• (Non-nullable) late fields throw a runtime error when accessed before they initialize. This should be avoided.

class PetOwner {
  final String name;
  late final Pet _pet;
  PetOwner(this.name, String petName) {
    // Cyclic object graph, cannot set _pet before owner exists.
    _pet = Pet(petName, this);
  }
  Pet get pet => _pet;
}
class Pet {
  final String name;
  final PetOwner owner;
  Pet(this.name, this.owner);
}

Use late for local variables only if unclear code results in the compiler being unable determine if the code initialized the variable.

doSomething(int n, bool capture) {
  late List<Foo> captures;
  if (capture) captures = [];
  for (var i = 0; i < n; i++) {
    var foo = something(i);
    if (capture) captures.add(foo);
  }
}

In the preceding example, the compiler does not know to assign captures if capture is true. Using late delays the normal "assigned" checks until runtime.

While JavaScript doesn't offer generics, Dart does to improve type safety and reduce code duplication.

You can apply generics to methods. To define a generic type parameter, place it between angle brackets < > after the method name. You can then use this type within the method as the return type or within the method's parameters:

Map<Object?, Object?> _cache = {};
T cache<T>(T value) => (_cache[value] ??= value) as T;

Define multiple generic types by separating them with a comma:

// Defining a method with multiple generics.
T transform<T, Q>(T param1, Q param2) {
   ...
}
// Calling the method with explicitly defined types.
transform<int, String>(5, 'string value');
// Types are optional when the analyzer can infer them.
transform(5, 'string value');

Generics can also be applied to classes. You can include the type to use when calling a constructor. This allows you to tailor reusable classes to specific types.

In the following example, the Cache class caches specific types:

class Cache<T> {
  T getByKey(String key) {}
  void setByKey(String key, T value) {}
}
// Creating a cache for strings
var stringCache = Cache<String>(); // stringCache has type Cache<String>
stringCache.setByKey('Foo', 'Bar'); // Valid, setting a string value.
stringCache.setByKey('Baz', 5); // Invalid, int type does not match generic.

If you omit the type declaration, the runtime type becomes Cache<dynamic> and both calls to setByKey are valid.

You can use generics to restrict your code to a family of types using extends. This ensures that your class is instantiated with a generic type that extends a specific type:

class NumberManager<T extends num> {
   ...
}
// Valid.
var manager = NumberManager<int>();
var manager = NumberManager<double>();
// Invalid, String nor its parent classes extend num.
var manager = NumberManager<String>();

Map, Set, and List literals can accept type arguments. This helps when Dart cannot infer the type or infer the type correctly.

For example, the List class has a generic definition: class List<E>. The type parameter E refers to the type of the list's contents. Normally, this type is automatically inferred, which is used in some List class's member types. (For example, its first getter returns a value of type E.) When defining a List literal, you can explicitly define the generic type as follows:

// Automatic type inference
var objList = [5, 2.0]; // Type: List<num>
// Explicit type definition:
var objList = <Object>[5, 2.0]; // Type: List<Object>
// Sets work identically:
var objSet = <Object>{5, 2.0};

This is also true for Maps, which also define their key and value types using generics (class Map<K, V>):

// Automatic type inference
var map = {
  'foo': 'bar'
}; // Type: Map<String, String>
// Explicit type definition:
var map = <String, Object>{
  'foo': 'bar'
}; // Type: Map<String, Object>

Regular comments work the same in Dart as they do in JavaScript. Using // comments out everything beyond it for the remaining line, and you can use /* ... */ to block comments spanning multiple lines.

In addition to regular comments, Dart also has doc comments that work in tandem with dart doc: a first party tool that generates HTML documentation for Dart packages. It's considered best practice to place doc comments above all declarations for public members.

Define a doc comment by using three forward slashes instead of two (///):

/// The number of characters in this chunk when unsplit.
int get length => ...

This guide has introduced you to the major differences between Dart and JavaScript. At this point, consider reading the Dart documentation. You could also read the Flutter docs. Built with Dart, Flutter is an open-source framework that uses Dart for building natively compiled, multi-platform applications from a single codebase. These docs provide in-depth information about the language and practical ways of getting started.

Some possible next steps:

• Language tour to learn more about the Dart language
• Core library documentation to learn about Dart's core libraries
• Dart tutorials for applied practice covering a variety of topics
• Effective Dart to learn about common conventions and guidelines when writing Dart code

除非另有说明，文档之所提及适用于 Dart 3.5.3 版本，本页面最后更新时间: 2024-10-22。 查看文档源码 或者 报告页面问题。